LC-02 · Profile guide

LC-02: classic detail with well-planned LED support

By Everest Mouldings & Specialties · Updated September 27, 2026

LC-02 pairs a curved face with a series of crisp upper steps. It suits rooms where the moulding should contribute visible detail even with the lights off. A warm ceiling wash adds another layer without changing the profile’s classic character.

LC-02 moulding and concealed uplight — LC-02 combines a compact concave face with crisp upper steps and a defined lower edge.

The support matters as much as the profile

In the illustrated flat-wall arrangement, the LED strip sits horizontally on a separate L-shaped support and faces upward. Plan the backing and the strip together. Follow the selected LED system’s requirements for mounting and heat management; the illustrated wood support is not a universal specification.

Dry-fit the moulding and check the glow from seated and standing positions before finishing. Keep the power supply accessible. The drawing’s approximate 2.5-inch gap is measured above the highest point of the moulding, not above the LED, and must be checked for the actual installation.

LC-02 section showing the separate backing and LED — LC-02 combines a compact concave face with crisp upper steps and a defined lower edge. The cutaway shows the LED behind the upper edge and the separate backing.

Plan your next step

For GTA supply and installation, send your location, room dimensions and photos. Electrical hookups, dimmers and motion sensors are project-specific options to discuss and quote. For other Canadian locations, check product and delivery options with Nu Crown; installation availability must be confirmed.

Confirm the chosen LED system’s mounting and heat-management requirements. Electrical work should be handled by a qualified professional under applicable requirements.

View LC-02 profile Shop LC-02 at Nu Crown Ask about LC-02

Choosing the right proportions

Limited lifetime moulding replacement warranty: coverage and conditions